120W 28KHZ Ultrasonic Cleaning generator PCB Industrial Ultrasonic Pcb Board Ultrasound System Power Control

120W 28KHZ Ultrasonic Cleaning generator PCB Industrial Ultrasonic Pcb Board Ultrasound System Power Control

Before cleaning the ultrasonic drive circuit board, sufficient preparation work needs to be done. Firstly, it is necessary to turn off the power of the device and unplug the power plug to ensure safety. Secondly, it is necessary to prepare cleaning tools such as soft brushes, vacuum cleaners, cleaning agents, clean cloths, etc. Finally, it is necessary to carefully read the equipment manual to understand the structure and component layout of the ultrasonic drive circuit board, in order to avoid damaging the circuit board during the cleaning process.
Cleaning the ultrasonic drive circuit board is an important measure to ensure the normal operation of ultrasonic equipment. Proper cleaning methods and precautions can effectively remove contaminants from circuit boards and restore their performance and stability. At the same time, in practical operation, attention should be paid to the principles of safety and gentle operation to ensure the safety and effectiveness of the cleaning process.

Type	Power	Frequency	Voltage	Current
PLS-GP50W	50W	20,25,28,33,40	220V	0.3
PLS-GP60W	60W	20,25,28,33,40	220V	0.3
PLS-GP100W	100W	20,25,28,33,40	220V	0.45
PLS-GP120W	120W	20,25,28,33,40	220V	0.54
PLS-GP150W	150W	20,25,28,33,40	220V	0.68
PLS-GP180W	180W	20,25,28,33,40	220V	080
PLS-GP200W	200W	20,25,28,33,40	220V	0.90