40KHZ 100L Industrial Heated Ultrasonic Electrolytic Mold Washer For Cleaning Injection Moulds Dies And Tools

40KHZ 100L Industrial Heated Ultrasonic Electrolytic Mold Washer For Cleaning Injection Moulds Dies And Tools

Principle of electrolytic mold cleaning machine: electrolysis is a process of chemical decomposition of substances under the action of electric current. In the process of electrolysis, the dirt on the metal surface begins to fall off, and the peeling is accelerated under the impact of ultrasonic wave. There are animal and vegetable oil, mineral oil, paraffin, carbon deposit and oxide layer on the metal surface. Remove these dirt by electrolysis. When the current passes through the mold electrolytic cleaner with special formula, oxygen will be generated near the positive pole of the electrolytic cell and hydrogen will be generated at the negative pole. Put the metal parts to be cleaned into the positive pole of the electrolytic cell. During the electrolysis process, there will be small hydrogen gas on the metal surface. These small bubbles will promote the dirt to peel off from the metal surface. Ultrasonic cleaning is the process of using 40KHZ high-frequency power supply to convert the transducer from electrical energy to mechanical energy, In this process, the transducer transmits huge energy to the cleaning tank solution, and generates positive and negative pressure areas in the liquid, forming tens of thousands of cavitation bubbles, which constantly form explosions, impacting the surface of the metal to be cleaned, so that the dirt on the metal surface can be quickly separated, so as to achieve the cleaning of the mold and restore the original color of the mold.