Ultrasonic Transducer Performance Test 1KHz-5MHz Impedance Analyzer For Ultrasonic Transducer

Ultrasonic Transducer Performance Test 1KHz-5MHz Impedance Analyzer For Ultrasonic Transducer

The selection of oscillators requires that their oscillating functions should be as consistent as possible (bandwidth, quality factor, resonant frequency, dynamic impedance). On the admittance circle diagram, there should be no parasitic circle or no parasitic circle near the resonant point It can analyze and measure the impedance characteristics of the transducer after fabrication, incoming material inspection, bonded transducer and cleaning machine The measurement of the whole machine of the cleaning machine can calibrate the resonant frequency and static capacitance of the machine, so as to match the power supply, and can analyze the characteristics of its new resonant point, impedance, capacitance after water injection and the oscillation mode of the whole machine

Characteristics of ultrasonic impedance analyzer

1. Basic accuracy: 0.05 [%]
2. Frequency accuracy: ± 0.005 [%]
3. Measuring parameters: Z, L, C, R, Q, D, Y, G, B, X
4. Output: 10mV to 1V rms, 200uA to 20mA rms
5. Display format: series/parallel circuit, or north and south pole type
6. Graphic analysis form: two optional parameters are selected to scan according to frequency and DC bias source
7. Form of electricity meter: it can be used to standardize LCR electricity meter
8. To be tested: component connection
9. There are many optional accessories for different test requirements
10. Consumption factor: ± 0.0005 (1+D * D2)
11. Quality element: ± 0.05 %

Ultrasonic Transducer Performance Test 1KHz-5MHz Impedance Analyzer For Ultrasonic Transducer

标签：Ultrasonic Impedance Analyzer