
12 Head Industrial Mist Maker Ultrasonic Fogger Mist Atomizer For Pool Rockery Balcony landscape Humidifiers
Precautions for using atomizer landscape When using this atomizer, please choose a DC power supply with an output power greater than 300W and an output voltage of DC46 ± 2V.When using a ring transformer, the square bridge must be equipped with aluminum heat dissipation fins of 5050mm or more, and a thin lay…
Precautions for using atomizer landscape
- When using this atomizer, please choose a DC power supply with an output power greater than 300W and an output voltage of DC46 ± 2V.
- When using a ring transformer, the square bridge must be equipped with aluminum heat dissipation fins of 5050mm or more, and a thin layer of heat dissipation paste must be applied between the square bridge and the aluminum heat dissipation fins.
- When multiple atomizers are used in the same container, the shells of each atomizer must be conductive to each other to prevent electrical corrosion of the shells.
- The fog generated by this atomizer must be forcefully eliminated by a fan, and each group of atomizers should reserve a flat space of 600cm2 to avoid excessive water temperature and shorten the service life of the atomizer.
- This atomizer is suitable for atomizing neutral liquids (pH value 5-8). Acidic liquids will corrode the shell and atomizing plates, while alkaline liquids will affect the atomization amount, reduce the lifespan of the atomizer and atomizing plates, and cause water level switch failure and damage to the atomizer.
- During the installation process, please do not damage the water level switch to prevent it from malfunctioning and causing the atomizer to lose control. After the water level switch is damaged, it should be stopped from use, otherwise the atomizer may dry out and further damage the atomizer. At this point, it needs to be repaired by professional maintenance personnel before use.
- When the atomizer works normally, please do not put your hand on the top of the spray chamber of the atomizer to prevent ultrasonic damage.
- This atomizer must be in water to function properly. Before use, please put it in water and then turn on the power, and ensure that the atomizer surface is in a watery state to avoid damage to the atomizer.
- Before stopping using the atomizer, please disconnect the switch power supply first, and then remove the atomizer from the water.
Type | Voltage | Size | Power | Water Rate |
PU-UHT-230W | 48V | 253*91*70MM | 230 | 4.5KG/H |
标签:12 Head Industrial Mist Maker Ultrasonic Fogger Mist Atomizer, Ultrasonic Fogger Mist Atomizer For Pool Rockery Balcony landscape Humidifiers
Send Inquiry
You May Also Like
- 10 Head Industrial Cool Mist Air Humidifier Atomizer Ultrasonic Mist Maker Fogger for Aquarium Water Tank
- Ultrasonic Atomizer Ultrasonic Industrial Humidifier Ultrasonic Mist Maker 10 Head Ultrasonic Fogger
- Ultrasonic Mist Maker for Ultrasonic Atomizer Fogger 12 Head Ultrasonic Mist Maker
- DC48V Ultrasonic Mist Maker Fogger Pool Landscape Fog Generator Ultrasonic Humidifier Parts
- 12 Heads Atomizer Dc 48V Ultrasonic Mist Maker Fogger Industrial Humidifier Rockery Pool Ultrasonic Atomization Head
- 12 Head Industrial Mist Maker Ultrasonic Fogger Mist Atomizer For Pool Rockery Balcony landscape Humidifiers
- Ultrasonic Mist Maker 12 Head Fogger Water Fountain Pond Atomizer Air Humidifier
- Atomizer Ultrasonic Disinfection Tunnel Fogger Ultrasonic Humidifier Mist Maker Ultrasonic Mist Maker Fogger
- 10 Head Mist Generator Outdoor Cooling Fogger Maker Ultrasonic Mist Humidifier
- Industry 4 Kilograms Of Small Garden Flowers And Humidification And Moistening Ultrasonic Industrial Atomizer Sprayer
- 10 Head Humidifier Ultrasonic Humidifier + Waterproof Power Supply,A Set Of Ultrasonic Industrial Humidifier Atomization Board
- Ultrasonic Atomizer mist maker ultrasonic 12 Fogger Ultrasonic 10 Head fountain mist make fogger